Seal Treatment is the application of Seal product. Water based seal is used on every PWP Maintenance Program/Package and is essential in keeping your pavers, roofs, concrete and stone clean at all times.

Seal is applied immediatly after a cleaning with a fine misting process that allows for optimal saturation. Sealant must be applied immediatly after ground cleanings and within 30 days of a roof cleaning.

Substrate is the surface or material on or from which an organism lives, grows, or obtains its nourishmentis, in this case its whatever surface we are sealing. Concrete, Stone, Paver, Roof Tile are all considered substrate.

Concrete, Stone, Paver, Roof Tile.

The only way to fix a bad seal is to completly strip it to its raw form and reapply our water based product. You can request an estimate here.

This is evidence of a poorly executed oil based seal. Most oil base seals require the substrate to be bone dry for optimal results. However, being in Southwest Florida, where the humidity is in the 70% and above year round, its hard to get optimal results and this creates the white splotchy areas on a substrate. Here at Powerwash Pros we only use our time tested, water based products, we can ensure your seals will look as if they are still raw substrate - free of mold or mildew for a minimum of 36 months for grounds and 72 months for roofs.

With that being said, the only way to fix a bad seal is to completly strip it to its raw form and reapply our water based product. You can request an estimate here.

Stripping is the process of chemically removing a previous seal or unknown stains such as motor oil, transmission fluid, iron, calcium or other mystery stains. You can request an estimate here.

Stripping is the process of chemically removing a previous seal or unknown stains such as motor oil, transmission fluid, iron, calcium or other mystery stains. This service is mandatory when prepping for a new PWP Seal Maintenance Program to ensure our program will work properly and give you the best seal outcome for longevity. You can request an estimate here.

Stripping is the process of chemically removing a previous seal or unknown stains such as a motor oil stain, transmission fluid stains, iron stains, calcium or other mystery stains. This service will be mandatory if your substrtate has any of these stains that do not come off with a normal biocide softwash cleaning or pressure cleaning. You can request an estimate here.

This would be an instance that Stripping is mandatory. Stripping is the process of chemically removing a previous seal or unknown stains such as motor oil, transmission fluid, iron, calcium or other mystery stains. You can request an estimate here.

All substrates react differently to seal. The older the surface the more pourous and worn it is - especially if it has been pressure washed and biocide softwashed repeatedly over the years. Sun damage also affects the condition of the concrete, stone or paver and its ability to fully saturate and hold the seal. Depending on the original condition of the substrate, some seals will require touch-ups for optimal, longlasting results. This is why regular inspecitions should be done accoriding to your service agreement or as needed based on the amount of growth occuring. You can request a touch up here.

PWP Seal Maintenance Programs cover Mold or Mildew Growth on a substrate. Ground Seals do not cover the folowing: Vegetation growth between pavers or stone, physical dirt or debris. Roof Seals do not cover the following: water leaks on the roof.

Regular inspecitions should be done accoriding to your service agreement or as needed based on the amount of growth occuring. Anything more than 20% regrowth in the first 36 months is cause for a touch up to be scheduled within 30 days. If you think you need a touch up or you would like to schedule your touch-up based on your service agreement please submit a Touch - Up request. Be Sure to submit photos and your invoice number so we can best asses how to treat your substrate and schedule you the most efficient and effective way. You can request a touch-up for your seal here.

PWP Seal Maintenance Programs cover Mold or Mildew Growth on a substrate. Ground Seals do not cover the folowing: Vegetation growth between pavers or stone, physical dirt or debris. Roof Seals do not cover the following: water leaks on the roof.

Minimum ground plans protect against growth for 48 months and up to 20% regrowth in the 4th year if not resigning.

Regular inspecitions should be done accoriding to your service agreement or as needed based on the amount of growth occuring. Anything more than 20% regrowth is cause for a touch up within 30 days. If you think you need a touch up or you would like to schedule your touch up based on your service agreement please submit a Touc - Up request. Be Sure to submit photos and your invoice number so we can best asses how to treat your substrate and schedule you the most efficient and effective way. You can request a touch-up for your seal here.

PWP Seal Maintenance Programs cover Mold or Mildew Growth on a substrate. Due to the fact that all stone is different in age and wear each estimate for seal is based on several factors including size, location, and age. Programs typically cost between $0.75 - $1.50 per square foot. All properties are assessed online through your local county's property appraiser as well as professional satilate image meassuring tools available to us. You can request an estimate for seal or strip/seal here.